Hilti Malaysia
Toll Free 1800-88-0985
Firestop
Firestop Systems
Hilti has a full range of firestop systems to prevent the passage of smoke, water and fire through penetrations in fire-rated construction assemblies. They are used to seal joints, cable penetrations and pipe openings in fire walls and floors. Each product has been optimised for the diverse requirments in buildings. We offer high quality products which have been tested world-wide and approved in accordance with national regulations.
Firestop Joint Spray : CP 672
The proven firestopping solution
Applications
Perimeter joints between floor slabs and curtain walls
Top of wall joints
Advantages
Flexible to withstand high movement of joints
Fast installation – saves labor and time
Supports large gaps of up to 200 mm
Convenient to use – sprayable, with very good consistency
High sound transmission classification (ASTM E 90-99)
Water, aging resistant and tested to ensure a service life of at least 30 years
Advantages
Firestop Foam : CP 620
Features
Up to 7 times expansion
Repentrable
Cures within 1-2 minutes
Applications*
Sealing small to medium sized openings
Permenent fire seal for:
a. cables
b. cable trays
c. non combustible pipes when used in conjunction with Hilti wrap Strips
d. cables, steel, cooper, cast irons or plastic pipes pass through the same opening
Blank opening
*Kindly contact Hilti Firestop Specialist for UL/BS 476-20 installation criteria
Applications*
a. cables
b. cable trays
c. non combustible pipes when used in conjunction with Hilti wrap Strips
d. cables, steel, cooper, cast irons or plastic pipes pass through the same opening
*Kindly contact Hilti Firestop Specialist for UL/BS 476-20 installation criteria
Firestop Brick: CP 657
Ready-to-use, intumescent flexible block based on a two-component polyurethane foam, mixed with graphite.
Features
Completely free from dust & fibers
Halogen, asbestos & solvent free
Operational immediately after installation
One sided wall system available
Applications
Temporary or permanent sealing of electrical cables in drywalls/ leads of all type: single & bunched cables and cable trays
Drywall partitions, masonry, concrete
Features
Applications
Firestop collars
Economical for use in conjunction with plastic pipes with a diameter > 50mm but < 250mm
more products
Firestop Sealant: FS ONE
Features
Smoke, gas and water resistant
No halogen, solvents or asbestos
High fire rating
Water based, easy to clean
Application
Steel, copper and EMT pipes
Insulated steel and copper pipes
Jacketed cables and cable bundles
Small plastic pipes up to 2 inches diameter
Use on concrete, masonry, blockwork, drywall and wood
Tested in combination with FS Fire Block (CP 657) as a gap filler
Application
Elastomeric Firestop Sealant:CP 601S
Elastic firestop sealant that provides maximum movement in fire reated applications
Uses:
Expansion joints
HVAC penetrations
Metal pipes
Top of wall joints
Suitable for masonry, concrete metal and glass
Sealing expansion joints / construction movement
Metal pipesand insulated metal pipe
Features
Halogen adn solvent free
Weather and UV-resistant
Asbestos free
Features
Flexible Firestop Sealant : CP 606
An acrylic based firestop sealant for low movement fire rated joints and
small pipes.
Use
Sealing:
a. header joints
b. drywall partition connections.
c. joints to CP 670 firestop safety board.
Metal pipes
Rigid & low movement joints
Concrete, masonry, drywall, steel, porous concrete
Wall & floor thickness from 100 mm
Joints widths from 6 -100 mm
Features
Halogen, solvent & silicon free
UV-resistant
small pipes.
Use
a. header joints
b. drywall partition connections.
c. joints to CP 670 firestop safety board.
Features
Pressure Exerting Intumescent Firestop Mastic: CP 611A
Uses:
Integrity:
a. 4 hours for permanent fire seals for single & bunched cables
b. 3 hours sealing around flammable pipes up to a max 50 mm.
Features
Cable penetrations: single/bundles cable through small wall or floor openings with an opening size up to about 300 cm²
Plastic pipes up to max. 50 mm diameter
Combine with metal collar for plastic pipes up to 100 mm diameter
Metal pipes (insulated/non-insulated) with little or no movement
a. 4 hours for permanent fire seals for single & bunched cables
b. 3 hours sealing around flammable pipes up to a max 50 mm.
Features
Fire Safety Coating System: CP 670
Applications
Extention for large diameter cables, dampered penetrations and double board usage
Single / bundles cables, cable tray, air ducts and pipes
Combustible and non combustible pipes
Large penetrations up to 5 metres high, any length
Drywall, Masonry & Concrete
Benefits
Odourless and solvent free
Fast, tight seal
Less prone to damage
Benefits
Firestop Mortar : CP 636
Fire resistant cement-based mortar with thermal insulating properties for fire stopping medium to large openings
Uses:
Integrity: from 2 hours to 4 hours for permanent fire seals round cables, metal pies and ductwork.
Medium to large openings
Cables and cable trays
Non combustible pipes
Possible to install further cables
Features
Ensures long term performance
Simplicity
No abestos, phenol or halogen
Uses:
Features
Firestop Endless Wrap: CP 648-E
Sealing of flammable plastic pipes for fire resistance up to 4 hours
Uses:
Firestop sealing of flammable plastic pipes from 50 - 160 mm diameter with pipe wall thickness from 1.8 - 14.6mm
PVC, PP, ABS, PE pipes
Concrete, masonry, porous concrete and drywall
Insulated metal pipes
Wall: two wraps in each side
Floor: one wrap on underside
Benefits
Flexibility
Fast installation
Easy to cut and measure
Uses:
Benefits
Firestop Cushion : CP 651
Ready-to-use firestop intumescent cushion contained in an inner polyethylene bag inside an outer protective woven fibreglass bag
Applicaitons
Integrity: Up to 2hours, suitable for -
Temporary or permanent sealing of cables and cable tray penetration.
For use in walls, floors and drywall
Features
Excellent for laying new cables
Tear-resistant and dust-free
Re-usable
Easy installation without special tool
Flexible
Applicaitons
Temporary or permanent sealing of cables and cable tray penetration.
Features
Firestop Plug: CP 656
Ready-to-use intumescent flexible plug based on a two component polyurethane foam
Uses:
Integrity/insulation tested: 3 hours for floors and walls up to 230 mm thick
Temporary or permanent sealing of single or bunched cables in fire walls and floors
Features
Economical
Easy installation, no specials tools required
Age tested for 30 years
Uses:
Features
Insulating Foam: CF-I
Universal construction foam with dispenser.
Uses:
Sealing and insulating of doors and windows
Filling and sealing gaps and openings
Insulating and filling aroud grooves for rising mains, water mains, gas mains and electrical mains
Filling of prefabricated conenction joints
Completionof thermal and acoustic insulations
Covering of electric cables
Insulating and filling around ventilation ducts, roofs, heating systems, plumbing installations, pipes and in cold stores
Filling Foam : CF-F
Filling foam for individual applications
Uses:
Filling
Pipe penetrations
Backfilling
Breaches in walls
Holes left by concrete forms
Insulating
Joints around window frames
Attics
Drywall
Water pipes
Filling
Insulating