1. Home
  2. Engineering
  3. Design Center
  4. Anchor System
  5. Typical Applications
  6. Formwork Installations With HUS4

Increase speed and reduce costs in temporary applications with HUS4

Formwork installations with HUS4 Screw anchors: Re-usable, removable and approved

Loading

Pressed for time and budget?

Since moving to screw anchors we find them 4x's faster to install than stud anchors

Boost productivity and profitability with economical, easy-to-install Hilti concrete screw anchors designed for use in solid, cracked or fresh concrete.

Whether you're installing traditional wooden formwork, system formwork, push-pull props or precast-prefab concrete wall elements, Hilti HUS4 Screw anchors can help you increase your productivity during formwork setup - no cleaning, no high-accuracy torque wrench and no hammering required

Hilti HUS4 Screw anchors are:

Quick to install: Faster to install than traditional stud anchors - simply drill, drive and you're done!

Re-usable: DIBt approved - HUS4 is safe for re-use with no reduction in performance - helping to reduce costs

Adjustable: Even after installation, Hilti HUS4 Screw anchors can be adjusted for a perfect installation*

Safe: No torque required, easy installation check 

Buy screw anchors online

* Adjustability ETA approved up to M10

How do Hilti HUS4 Screw Anchors work?

The industry’s most cutting-edge screw anchor

Introducing HUS4: Hilti’s fourth generation mechanical screw anchor. Raising the bar in anchor innovation, they not only allow you to support loads equal or greater than stud anchors, they're adjustable and reusable too! HUS4 features a tested and approved adjustability process (ETA), allowing for quick and easy base plate levelling, adjustments and realignments.

Buy now

THE BENEFITS OF HILTI SCREW ANCHORS

Loading

Formwork Applications for Hilti Screw Anchors

Reduce long setup times by using Hilti Screw anchors to secure your props and formwork panels to the concrete base.
1 / 4
Timber Formwork

Reduce long setup times by using Hilti Screw anchors to secure your props and formwork panels to the concrete base.

You can safely use and re-use Hilti HUS3 Screw anchors helping you to save money across projects.
2 / 4
SYSTEM FORMWORK

You can safely use and re-use Hilti HUS4 Screw anchors helping you to save money across projects.

Swap your traditional stud anchors for faster Hilti HUS3 Screw anchors to reduce costs by improving productivity.
3 / 4
PUSH / PULL PROPS

Swap your traditional stud anchors for faster Hilti HUS4 Screw anchors to reduce costs by improving productivity.

Improve your productivity and reduce costs by swapping your your traditional stud anchors for our fatser Hilti HUS3 Screw anchors.
4 / 4
PRECAST / PREFAB CONCRETE

Improve your productivity and reduce costs by swapping your your traditional stud anchors for our fatser Hilti HUS4 Screw anchors.

Buy screw anchors online

Selecting the right HUS4 Screw Anchor

HUS4 Screw anchor Plate hole size Anchor hole size
 		Load
HUS4-H 8 12 mm 8 mm 7.7 kN
HUS4-H 10 14 mm 10 mm 10.5 kN
HUS4-H12 16mm 12mm 11.7 kN
HUS4-H 14 18 mm 14 mm 12.6kN
HUS4 -H 16 20mm 16mm 21.9kN

Technical datasheets

Buy screw anchors online

More Hilti Solutions for Formwork Applications

  • Screw Anchors

    HUS Screw Anchors: Concrete screw anchors for permanent and temporary applications – including screw anchors which can be used in solid brick and hollow-core slabs

    Concrete screw anchors for permanent and temporary applications – including screw anchors which can be used in solid brick and hollow-core slabs

    Find out more
    Expansion anchors

    Complete range of expansion anchors: In carbon steel and stainless steel, approved for cracked concrete, uncracked concrete and seismic – including stud anchors and sleeved anchors

    Complete range of expansion anchors in carbon steel and stainless steel, approved for cracked concrete, uncracked concrete and seismic – including stud anchors and sleeved anchors

    Find out more