Skip to main content

List Price Increase effective from 1st June 2022 Find out more


Features & Applications

  • High performance and technical superiority as per international approvals
  • Suitable for diamond-cored holes – when prepared using the TE-YRT roughening tool
  • Injectable epoxy suitable for all-year use – cures at temperatures down to -5°C / 23°F
  • Longer working time – allows greater flexibility during installation
  • Suitable for water-filled holes and underwater applications
  • Structural connections with post-installed rebar (e.g. extension/connection to walls, slabs, stairs, columns, foundations, etc.)
  • Structural renovation of buildings, bridges and other civil structures, retrofitting and re-strengthening of concrete members possible
  • Anchoring structural steel connections (e.g. steel columns, beams, etc.)
  • Fastenings requiring seismic qualification
  • Fastening in natural stone and wood, including GLT and CLT made by spruce, pine or fir.

Technical Data

Documents & Videos

Consulting & Support

Injectable epoxy mortar for cracked concrete and for use under seismic conditions

Hilti HIT-RE 500 V3

Injectable epoxy anchor for use in cracked concrete and under seismic conditions

Fifteen years ago, Hilti set legendary standards for designers and contractors alike with HIT-RE 500 – one of the first injectable epoxy anchors for post-installed rebar and anchoring applications. 

And because our customers needed the same high performance and reliability in cracked concrete and seismic applications, we introduced HIT-RE 500-SD for fastening under these conditions.

The new HIT-RE 500 V3 delivers performance and safety in design while making installation even easier and faster than ever before. 


Base material
Cracked and un-cracked concrete
Recommended applications Post-installed rebar connection 
  All anchoring applications
Category Slow cure epoxy injection mortar
Curing time at +20°C 7,0 h.
Working time at +20°C 30 min.
ETA approvals
ETA-16/0143 for Anchoring
  ETA-16/0142 for Post-installed rebar
Load type Static, seismic
Anchor diameters M8 – M30
Rebar diameters Ø8 - Ø40 mm.
Drilling method  
SafeSet with Hilti hollow drill bit Yes
Hammer drill bit Yes
Diamond coring Yes
Base material condition  
Dry Yes
Wet Yes
Water filled Yes
Underwater Yes
Log in to proceed
Register Now
Added to cart
Added to cart
Go to shopping cart