MQS-HR Seismic hinge

Galvanised hinge for seismic bracing of MEP support structures

Material composition: Connector: S275JR - EN 10025-2, Pin: 11SMnPb37+C - DIN EN 10277-3
Surface finish: Indoor Coated - Electro galvanised
Material thickness: 3 mm

Technical Data

Material composition

Connector: S275JR - EN 10025-2, Pin: 11SMnPb37+C - DIN EN 10277-3

Surface finish

Indoor Coated - Electro galvanised

Material thickness

3 mm

Environmental conditions

Dry indoor conditions (C1) Indoor with temporary condensation (C2)

Retrofittable and adjustable – two-component design can more easily be post-installed to existing pipe/cable supports, with angle markings to make it easier to fix the rod at 45°
Versatile – load range suitable for a wide range of light- and medium-duty MEP installations
Engineering support available – contact your local Hilti team for project-specific advice

Installing pipes, cable trays and air duct supports in seismic-relevant areas
Connecting threaded rod and wire seismic bracing to MEP support structures, such as trapeze and suspended pipe rings
Recommended for use in dry, interior environments

For approval or certificate information, please see individual items.