Search Results
468 Products for "te spx"
Filter
premium
- Description
- Premium paper grinding discs for finishing stainless steel, steel and other metals
- Base material
- Steel, Stainless steel
- Product class
- Premium
- Description
- Bimetal jig saw blades for cutting hardwood, fibreboard and other wood-based material
- Product class
- Ultimate
- Base material
- Hardwood (beech, oak etc.), Fibre board, Softwood (fir, pine, etc.), Plywood, Wood composites, Chipboard
- Blade features
- Straight cut, Precise cut
premium
- Description
- Premium abrasive cutting disc
- Product class
- Premium
- Base material
- Steel, Stainless steel
- Tool type
- Angle grinder
ultimate
- Description
- Bimetal jig saw blades for cutting hardwood, denser boards and composites
- Product class
- Ultimate
- Base material
- Hardwood (beech, oak etc.), Softwood (fir, pine, etc.), Plywood, Fibre board, Chipboard, Wood composites, Timber
- Blade features
- Straight cut, Fast cut
ultimate
- Description
- Double-sided jig saw blade for cutting very tight curves in soft wood, plywood and OSB
- Product class
- Ultimate
- Base material
- Softwood (fir, pine, etc.), Plywood, Chipboard, Fibre board
- Blade features
- Curved cut
- Description
- High-durability joint sealant spray for general purpose applications
- LEED VOC
- 34 g/l
- Base materials
- Concrete, Masonry, Gypsum, Steel, Metal
- Application temperature range
- 4 - 40 °C
- Description
- Nut for attaching media to MT strut channels
- Material composition
- High Strength Steel
- Surface finish
- Indoor Coated - Pre-galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Nut for attaching media to MT strut channels
- Material composition
- High Strength Steel
- Surface finish
- Indoor Coated - Pre-galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Nut for attaching media to MT strut channels, for outdoor use with low pollution
- Material composition
- High Strength Steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
premium
- Description
- Plastic cable/conduit tie holder for use with collated nails
- Application
- Cable Fastenings, Conduit Fastening
- Material
- Polyamide (PA)
- For use with (tools)
- BX 3, DX 351, DX 460, DX 5, DX 6, GX 3
- Description
- hot-dip galvanised (HDG) tooth plate used with the MIA-OH bolt for fastening of MI and MIQ connectors
- Surface finish
- HDG: 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
ultimate
- Description
- Plastic universal cable/conduit tie holder for use with BX and GX nailers
- Application
- Cable Fastenings, Conduit Fastening
- Material
- High-density polyethylene (HDPE), Halogen-free, Silicone-free
- For use with (tools)
- BX 3, GX 120, GX 3
- Description
- Nut for attaching media to MT strut channels, for outdoor use with low pollution
- Material composition
- High Strength Steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Galvanised channel tie to create double channels
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
ultimate
- Description
- Torque-controlled socket wrench for setting HSA anchors
- Connection end
- 1/2 in square
- Description
- Ultimate-performance through-set undercut anchor for dynamic loads (sherardised steel)
- Material, corrosion
- Carbon steel, HDG (hot-dip galvanised)/sherardised
- Head configuration
- Externally threaded
- PROFIS software
- No
premium
- Description
- Square shank tapping bit for cutting threads in steel ≤700 N/mm², threads compliant with DIN 371
- Product class
- Premium
- Connection end
- Square shank
- DIN
- DIN 371
- Description
- Galvanised channel connector used as a longitudinal extender for MQ strut channels
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Material thickness
- 4 mm
- Description
- Very robust aluminium asset tag with metal wire shackle for tracking tools and equipment exposed to heavy usage
- Dimensions (LxWxH)
- 26 x 9 x 35 mm
- Barcode type
- 2D barcode (Datamatrix ECC200)
- Operating temperature range
- -20 - 65 °C
ultimate
- Description
- Specialised arbors for Hilti hole saws including versions for rotary hammers, large diameters or tight spaces
- Base material
- Multiple materials
- Working mode
- Drilling
- Connection end
- No connection end
- Description
- Flat T channel connector for fastening two MT strut channels together, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Heavy-duty bimetal reciprocating saw blades for cutting metal, wood and other materials
- Product class
- Premium
- Shank
- 1/2" universal shank
- Teeth per inch
- 10-14
- Description
- Longer-lasting reciprocating saw blade for cutting 3.5-10 mm (1/8 - 7/16") thick metal
- Product class
- Premium
- Shank
- 1/2" universal shank
- Teeth per inch
- 14
New
premium
- Description
- Premium band saw blade for low-noise cold cutting through metal and plastic
- Base material
- Metal, Steel, Stainless steel, Non-ferrous metal, Plastic
- Product class
- Premium
- Description
- Jig saw blades for cutting straight, precise lines in soft wood and plywood
- Product class
- Premium
- Base material
- Softwood (fir, pine, etc.), Plywood, Fibre board, Chipboard
- Blade features
- Straight cut, Precise cut
New
premium
- Description
- Longer-lasting general steel cutting disc for petrol saws
- Product class
- Premium
- Base material
- Steel
- Tool type
- Gas saw
- Description
- Jig saw blades for cutting curves at high speed in soft wood and OSB
- Product class
- Premium
- Base material
- Softwood (fir, pine, etc.), Chipboard, Plywood
- Blade features
- Curved cut
- Description
- Galvanised flat washer similar to ISO 7089
- Material composition
- Steel
- Surface finish
- Indoor Coated - Electro galvanised
- Load range
- Light-duty
- Description
- Hot-dip galvanised (HDG) clamp for cross-connection of one MQ strut channel to another
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 4 mm
- Description
- Carriages and carriage accessories
- Accessory type
- Spacers
- Additional accessory information
- Increases the drillable diameter range of the DD-HD 30 drill stand by 150 mm
- Description
- Galvanised flexible channel connector used as a longitudinal extender for MQ strut channels
- Material composition
- S235JRG2 - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Material thickness
- 4 mm
- Description
- Galvanised flat T channel connector for fastening two MQ strut channels together
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Material thickness
- 4 mm
- Description
- Galvanised flexible channel connector for two-dimensional structures
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Material thickness
- 4 mm
- Description
- Galvanised flexible channel connector for two-dimensional structures
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Material thickness
- 4 mm
- Description
- Galvanised channel connector for three-dimensional structures
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Material thickness
- 4 mm
- Description
- Interchangeable self-tightening chuck for the SF 8M-22 cordless drill driver
No technical data available
ultimate
- Description
- Ultimate-performance collated nails for fastening to steel using the GX 120 gas nailer
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 4 mm
- Corrosion protection
- Galvanised zinc coated <20 µm
New
ultimate
- Description
- Ultimate-performance collated nails for fastening to steel using the BX 3 cordless nailer
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 4 mm
- Corrosion protection
- Galvanised zinc coated <20 µm
premium
- Description
- Ultimate-performance collated nails for fastening to steel using the GX 3 gas nailer
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 4 mm
- Corrosion protection
- Galvanised zinc coated <20 µm
standard
- Description
- Collated nails for fastening to concrete and other base materials using the GX 120 gas nailer
- Base materials
- Concrete (soft), Masonry (solid limestone brick), Masonry (grout filled concrete block)
- Minimum thickness of base material (concrete)
- 60 mm
- Corrosion protection
- Galvanised zinc coated <20 µm
- Description
- 1/2" (inch) long impact socket for tightening bolts and anchors, with magnetic impact and thin wall adaptation
- Connection end
- 1/2 in square
- Short/long
- Long
- Material coating/plating/finish
- Silver, Coated
standard
- Description
- Premium collated nails for fastening to concrete and other base materials using the GX 3 gas nailer
- Base materials
- Concrete (soft), Masonry (solid limestone brick), Masonry (grout filled concrete block)
- Minimum thickness of base material (concrete)
- 60 mm
- Corrosion protection
- Galvanised zinc coated <20 µm
New
standard
- Description
- Premium collated nails for fastening to concrete and other base materials using the BX 3 cordless nailer
- Base materials
- Concrete (soft), Masonry (solid limestone brick), Masonry (grout filled concrete block)
- Minimum thickness of base material (concrete)
- 60 mm
- Corrosion protection
- Galvanised zinc coated <20 µm
- Description
- Stud- or surface-mounted gangplate to increase the capacity of firestop speed sleeves and simplify cable management
- Base materials
- Drywall, Concrete, Masonry, Aerated Concrete, Sandwich Panel
- Maximum wall thickness
- 300
- Product class
- Ultimate
New
premium
- Description
- Ultimate-performance collated nails for fastening to concrete and other base materials using the BX 3 cordless nailer
- Base materials
- Concrete (soft), Concrete (tough), Masonry (solid limestone brick), Masonry (grout filled concrete block)
- Minimum thickness of base material (concrete)
- 60 mm
- Corrosion protection
- Galvanised zinc coated <20 µm
- Description
- Ultimate-performance collated nails for fastening to concrete and other base materials using the GX 3 gas nailer
- Base materials
- Concrete (soft), Concrete (tough), Masonry (solid limestone brick), Masonry (grout filled concrete block)
- Minimum thickness of base material (concrete)
- 60 mm
- Minimum thickness of base material (steel)
- 4 mm
Nuron
- Description
- Ultimate 22V Li-ion battery built to boost the performance and run time of heavy-duty Nuron power tools
- Battery capacity
- 8.0 Ah
- Weight
- 1.31 kg
- Dimensions (LxWxH)
- 156 x 87 x 76 mm
Nuron
- Description
- Top-performance 22V Li-ion battery to maximise the output and run time of heavy-duty Nuron hammer drilling and cutting tools
- Battery capacity
- 12 Ah
- Weight
- 1.84 kg
- Dimensions (LxWxH)
- 157 x 87 x 99 mm
- Description
- Sealing for the DD-WC-S water dam for core bit diameters from 8 mm (5/16") to 87 mm (3-7/16")
- Accessory type
- Sealing washers
- For use with
- DD 120, DD 200, DD 350-CA, DD 500-CA
- Description
- Autofeed unit to assist the drilling process with rig-based diamond coring systems – for use with the DD 350-CA and DD 500-CA
- For use with
- DD 350-CA, DD 500-CA
- Weight
- 4.5 kg
- Dimensions (LxWxH)
- 361 x 193 x 133 mm
- Description
- Node for assembling strut channels in a T shape
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Pre-galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Cleaner to remove uncured foam from most work surfaces, as well as from around the dispenser
No technical data available
- Description
- Calibration card for S-BT threaded screw-in studs to ensure the correct screw-in depth
No technical data available
- Description
- Calibration card for S-BT threaded screw-in studs to ensure the correct screw-in depth
No technical data available
- Description
- Wedge-puller tool to quickly remove the compression wedge when retrofitting additional cables within a transit frame
- Storage and transportation temperature range
- 5 - 25 °C
- Temperature resistance range
- -40 - 50 °C
- Description
- Extension hose to be used together with the HIT-SZ piston plug for injectable hybrid/epoxy mortal
- Plug Diameter
- 12 - 35 mm
- Description
- Extension hose to be used together with the HIT-SZ piston plug for injectable hybrid/epoxy mortal
- Plug Diameter
- 20 - 55 mm
- Description
- Core breaker breaks and removes the complete core from the diamond cored hole
- Application 01
- Breakage and removal of the concrete core from the drilled hole
- Accessory type
- Other
- Advantage 01
- Precise breakage and removal of the concrete core at the required depth, allowing use of the complete hole depth for anchoring
- Description
- Inspection card S-IC BT for S-BT threaded screw-in studs to ensure the correct screw-in depth
No technical data available